Welcome to our online store!

Ford

Items 31 to 40 of 66 total

per page

Items 31 to 40 of 66 total

Page:
  1. Previous Page
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next Page

Grid  List 

Set Descending Direction
  1.   2018+ Ford Mustang GT V8 6-Speed Manual 3.25" Carbon Fiber 1-Piece CV Driveshaft  
    1 year warranty Learn More
  2.   2015-2017 Ford Mustang V6 1-piece 4" Aluminum Shaft (Manual Transmission ONLY)  
    1 year warranty Learn More
  3.   2016+ Shelby GT-350 1-Piece CV Aluminum Driveshaft  
    1. 3.5" diameter aluminum construction.
    2. Billet aluminum endcaps.
    3. 300M Chromoly spline plugs.
    4. GKN Germany high-speed CV joint.
    5. Spicer 1350 series solid U-Joint.
    6. Forged aluminum U-Joint flange.

    Please Note - Emergency brake cable bracket clearance/ relocation may be necessary.

    1 year warranty Learn More
  4.   FORD 2011-14 Mustang GT and BOSS 302 6-Speed Manual and Automatic 1-Piece Aluminum Shaft with CV 900HP 3-1/2 Aluminum / 1350 has no clearance issues  
    The Driveshaft Shop proudly introduces the new Mustang 3.5” 1-Piece Aluminum CV Shafts

    1.1350 front u-joint with flange to mount up to the transmission
    2. 3.5” 6061-T6 aluminum rated for 3450ft lbs of torque, custom welded on our auto feed machines
    3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft
    4. Custom modified High Speed 108mm CV with special boot and grease.
    5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version
    6. All Hardware included
    7. 1 Year Warranty
    8. 1000HP Rated
    9. Balanced on one of the most sophisticated balancing machines in the industry.
    10. with the CV in the rear there is no need to change pinion angle on lowered cars.

    warranty - 1 year

    Modification Notes:

    No pinion angle adjustment is necessary when using a Driveshaft Shop driveshaft and we strongly discourage it. If you have aftermarket relocation brackets, adjustable control arms or other custom suspension components that change the pinion angle it also affects the actual length of the opening and will cause an issue with our shaft, The adjustable parts are only needed if the shaft your installing has a u-joint so please do not install something if not needed (DSS is a CV) the CV gap must be checked even more carefully after installation if you have changed any of these items. Damage to the driveshaft caused by aftermarket parts which caused the pinion angle to change cannot be covered under warranty.


    For the last 6 years we have been chasing an elusive thing, we have been trying to make a driveshaft for the new Mustang (S197) that is not only the strongest shaft out Learn More
  5.   FORD 2011-14 Mustang V6 6-Speed Manual / Automatic 3.5" 1-Piece with CV Aluminum Driveshaft  
    The Driveshaft Shop proudly introduces the new Mustang 3.5" 1-Piece Aluminum CV Shafts

    1.1350 front u-joint with flange to mount up to the transmission
    2. Heavy Duty 3.5" Aluminum (no clearance issue).
    3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft
    4. Custom modified High Speed 108mm CV with special boot and grease.
    5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version
    6. All Hardware included
    7. 1 Year Warranty
    8. Balanced on one of the most sophisticated balancing machines in the industry.
    9. with the CV in the rear there is no need to change pinion angle on lowered cars. Learn More
  6.   FORD 2011-14 Mustang V6 6-Speed Manual / Automatic 4" 1-Piece with CV Aluminum Driveshaft  
    The Driveshaft Shop proudly introduces the new Mustang 4" 1-Piece Aluminum CV Shafts

    1.1350 front u-joint with flange to mount up to the transmission
    2. Heavy Duty 4in Aluminum (no clearance issue).
    3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft
    4. Custom modified High Speed 108mm CV with special boot and grease.
    5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version
    6. All Hardware included
    7. 1 Year Warranty
    8. Balanced on one of the most sophisticated balancing machines in the industry.
    9. with the CV in the rear there is no need to change pinion angle on lowered cars. Learn More
  7.   FORD 2011-14 Mustang V6 6-Speed Manual / Automatic 1-Piece Shaft with CV Carbon Fiber Driveshaft  

    FORD 2011-14 Mustang V6 6-Speed Manual / Automatic 1-Piece Shaft with CV Carbon Fiber Driveshaft

    Regular Price: $1,364.99

    Special Price: $1,249.99


    The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts

    1.1350 front u-joint with flange to mount up to the transmission
    2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.
    3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft
    4. Custom modified High Speed 108mm CV with special boot and grease.
    5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version
    6. All Hardware included
    7. 1 Year Warranty
    8. 900HP Rated
    9. Balanced on one of the most sophisticated balancing machines in the industry.
    10. with the CV in the rear there is no need to change pinion angle on lowered cars.
    11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.




    For the last 6 years we have been chasing an elusive thing, we have been trying to make a driveshaft for the new Mustang (S197) that is not only the strongest shaft out there, but also the most stable shaft when it comes to dealing with the harmonic vibrations that these cars are plagued with. In our opinion Learn More
  8.   FORD MUSTANG 1996-2004 4.6L (T45) Carbon Fiber Driveshaft  
    Warranty: 1 year| Special Notes: Learn More
  9.   FORD MUSTANG 1996-2004 Automatic (4R70W) 3.5" Aluminum Driveshaft 950HP  
    Warranty: 1 year| Special Notes: Learn More
  10.   FORD 2011-14 Mustang GT and BOSS 302 6-Speed Manual and Automatic 1-Piece Shaft with CV 900HP 3-1/4 Carbon Fiber Driveshaft  
    The Driveshaft Shop proudly introduces the new Mustang 3.25” 1-Piece Carbon Fiber CV Shafts

    1.1350 front u-joint with flange to mount up to the transmission
    2. 3.250 High Modulus Carbon fiber tube with New DSS bond method. The Tube is smaller that others offered so there will be no clearance or heat issues.
    3. New version 300M Spline for the CV mount that is stronger than the rest of the shaft
    4. Custom modified High Speed 108mm CV with special boot and grease.
    5. Custom conversion plate (corrosion plated) to change from the stock Ford CV to our 108mm version
    6. All Hardware included
    7. 1 Year Warranty
    8. 900HP Rated
    9. Balanced on one of the most sophisticated balancing machines in the industry.
    10. with the CV in the rear there is no need to change pinion angle on lowered cars.
    11. Carbon shaft will be about 1-2lbs lighter than the Aluminum shafts but are much more torsional and will reduce noise in the cabin.

    1 year warranty

    Modification Notes:

    No pinion angle adjustment is necessary when using a Driveshaft Shop driveshaft and we strongly discourage it. If you have aftermarket relocation brackets, adjustable control arms or other custom suspension components that change the pinion angle it also affects the actual length of the opening and will cause an issue with our shaft, The adjustable parts are only needed if the shaft your installing has a u-joint so please do not install something if not needed (DSS is a CV) the CV gap must be checked even more carefully after installation if you have changed any of these items. Damage to the driveshaft caused by aftermarket parts which caused the pinion angle to change cannot be covered under warranty.


    For the last 6 years we have been chasing an elusive thing, we have been trying to make a driveshaft for the new Mustang (S197) that is not only the strongest shaft out there, but also the most stable shaft when it comes to dealing with the harmonic vibrations that these cars are plagued with. In our opinion Learn More

Items 31 to 40 of 66 total

per page

Items 31 to 40 of 66 total

Page:
  1. Previous Page
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next Page

Grid  List 

Set Descending Direction