Welcome to our online store!

Search results for 'th 350'

Items 1 to 10 of 1037 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page

Grid  List 

Set Ascending Direction
  1.   CADILLAC 2016+ CTS-V Auto 1-Piece Carbon Fiber Driveshaft  
    PLEASE READ:

    It has come to our attention that the 2016+ Cadillac CTS-V with the 8-speed automatic transmission can present clearance issues. These areas MUST be checked during installation of carbon or aluminum driveshafts:

    1 – The center gas tank bolt must be removed.
    2 – The gas tank insulation stickers must be removed.
    3 – The exhaust heat shields must be removed from the driveshaft tunnel and the heat shield mounting studs must be ground flush with the tunnel.
    4 – The transmission tunnel brace forward of the gas tank must be cut away to avoid contacting the driveshaft weights during hard cornering.

    FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE DRIVESHAFT DAMAGE AND VOID THE WARRANTY.
    Learn More
  2.   HONDA Civic EG/EK H-Series Pro-Level Axle/Hub/28 spline Intermediate Bar Kit  (Hasport EGH2/EGH3 & EKH2/EKH3 mounts)  
    Warranty: 1-year| Special Notes: Complete kit with axles/hubs and 28 spline intermediate bar (DSS Pro-LSD sold separately)

    For use with Hasport EGH2/EGH3 & EKH2/EKH3 mounts, if you are not using these motor mounts, please see part# HY58
    Learn More
  3.   HONDA B-Series (GS-R transmission) 28 Spline Pro-Level Limited Slip Differential  
    Warranty: 1-year| Special Notes:B-Series (GS-R transmission) PART# PRO-BG-LSD
    Please Note: Standard dealer discounts do not apply to this part, dealers call for pricing Learn More
  4.   2015+ Mustang V6 Automatic 1-Piece 3.5'' Aluminum Driveshaft with Direct Fit CV  
    1. 3.5" diameter aluminum construction.
    2. Billet aluminum endcaps.
    3. 300M Chromoly spline plugs.
    4. High-speed precision ground CV joint with chromoly internals. Has twice the range of the previous design.
    5. Spicer 1350 series solid U-Joint.
    6. Forged aluminum U-Joint flange.
    7. 1000+ hp Rating.

    Please Note - Emergency brake cable bracket clearance/ relocation may be necessary. Failure to check this clearance may damage the driveshaft and void the warranty.

    1 year warranty Learn More
  5.   NISSAN S14 with RB25 (5-Speed) using Tophat Mounts / ABS / Steel driveshaft  
    Warranty: 1 year | Special Notes: Whether or not the car was equipped with ABS from the factory will change the length of the driveshaft. Be sure to check vehicle before ordering. Learn More
  6.   2015+ R35 Rear axle Stubs for the GTR (For NI78 Kit)  
    When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).


    (Price is for both left and right they are 314.99 each)

    Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68) Learn More
  7.   MITSUBISHI 2008-2015 Evo X 900HP Level 5 Direct Bolt-In Rear Axles  
    Warranty: 1-year| Special Notes:

    We have recently updated the design with a new 2-piece outer CV housing and a 300m stub shaft. Learn More
  8.   MAZDA 1993-1995 RX-7 (FD) Rear Axle Bar Upgrade  
    Warranty: 1 year| Special Notes: This kit includes both axle bars, boots, clamps and grease only Learn More
  9.   93-98 Toyota Supra Automatic (with Stock / TH400 / Powerglide) 9-Inch Direct Bolt-in Rear Conversion Kit -includes Axles, Hubs and Driveshaft  
    Warranty: 1-year| Special Notes:Please Note: Standard dealer discounts do not apply to the Differential parts (front housing with internals, gears,pinion etc in drop down boxes) , dealers call for pricing

    If a transmission other than the Stock Supra Automatic is selected (TH400 / Powerglide, etc) we will send you the kit without the driveshaft. Once the kit is installed, provide us with a measurement from the car and we will build the driveshaft and send it to you as soon as possible.

    We have had varying measurements due to the different mounting plates available and want to ensure proper driveshaft fitment.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  10.   SCION 2004-2007 xA / xB 600HP Level 3.9 Axle/Hub Kit  
    Warranty: 1 year | Special Notes: Learn More

Items 1 to 10 of 1037 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page

Grid  List 

Set Ascending Direction