Welcome to our online store!

Search results for 'ek k'

Items 1 to 10 of 898 total

per page

Grid  List 

Set Descending Direction
  1.   STRANGE C4, T5, TREMEC 3550, AOD BILLET 1350 TRANSMISSION YOKE  
    Special Notes: PART# U1668 STRANGE YOKE Learn More
  2.   HONDA 2000-2003 S2000 (AP1) 1-Piece Aluminum CV Driveshaft  
    -Warranty: 1 year
    -Internally Dampened for quiet performance.
    -Added strength, no added weight.
    -Also available in Carbon Fiber. Learn More
  3.   PONTIAC 2004-2006 GTO 1400HP 300m Axle Kit with 300m 108mm Bolt-on Inner Stubs  
    Reasons to use DSS axles:

    1. Full certified 300m center bars (not just 28 spline like the others). There is a reason the Viper T56 uses a 30 spline and its the reason we do too.

    2. Certified 4340AQ cages with re-designed radius on the CV cage windows.
    Others will try to impress you with saying chromoly is a weaker part for the center bar (we have always used 300m and 4340) but uses it on their cages, we're not sure how most dont see thru this, but our cages are full 4340AQ. You decide.

    3. Our center race in the CV is certified 300m, this should need no explanation, no one else uses this and we can prove it...

    4. Rolled splines on our axle bars. Most know that a forging is always stronger than billet. Here at The Driveshaft Shop we roll our splines, this is by far the strongest way to form a spline and is far superior to cut splines (old technology).

    Warranty: 1 year| Special Notes: Learn More
  4.   /  
    Available now for the 2008-2009 G8 is our 3-1/2 aluminum shaft with CV

    Warranty: 1-year| Special Notes: 240MPH Max Speed. Learn More
  5.   NISSAN Skyline R32 / R33 / R34 GT-S (and RWD variants) 1000HP Rear Pro-Level Rear Axles  
    The R32-R34 GT-S Pro-Level Rear Axle Kit features a direct fit outer CV made from a high grade proprietary material, Porsche style 108mm CV's on both ends but we have upgraded them to use our signature 30 spline bars with billet 4340 cages, our aerospace ..... Learn More
  6.   2012-2018 Jeep Grand Cherokee SRT Front Carbon Fiber Driveshaft NAG1/ 8 Speed  
    1. Custom 108mm CVs with high speed boot and special grease
    2. Spline made from 300m and installed into aluminum head for superior strength and light weight
    3. Balanced on our high speed machine
    4. Comes complete with all high grade hardware
    5. Rated for 1000hp +
    6. 1-year warranty.
    7. 28 lbs Learn More
  7.   2009-2012 Hyundai Genesis Coupe 2.0 Turbo Auto 3.8 Carbon Fiber Driveshaft  
    1. 300m Spline stub for ultimate strength
    2. custom 108mm CV with full Chromoly internals
    3. balanced on one of the most sophisticated machines in the industry
    4. This single shaft will make the car more athletic and solid feeling. Learn More
  8.   TOYOTA Supra 1986-1992 Non-Turbo Manual 1-Piece Steel Driveshaft  
    Warranty: 1 year | Special Notes:

    **U.S. Models Only** Learn More
  9.   2007-2013 Holden Commodore VE Ute Automatic 9" Pro-formed 9" kit (new style with larger bushings and more)  
    The Drive Shaft shop is proud to announce the release of the new Generation V2 Holden Commodore VE Ute 9" Rear Conversion Kit. This system has been designed and built specifically for the Camaro platform. The new version has been updated to be a more street friendly version. First, we have changed over to using a new "Pro-Formed" Rear housing. It may have the looks of a fabricated housing, but in the true DSS way of making parts its a lot better. It is a press formed housing with less welds than a fabricated housing (eliminating the issues with fully welded housings). We have also moved the housing down and back a bit so that any Diff Case can be mounted without clearance issues.
    When we first made this kit it was for the "Baddest" cars out there (the DSS 9" kit is in all the 7 and 8 second 5th gen Camaros out to date), we were using almost solid bushings, we positioned the housing up to the gas tank as far as we could get the axle angle correct, and designed the 1st gen kit to use the Nodular case. But not anymore.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  10.   DODGE 2008 LC Challenger SRT8 / R/T Automatic 4'' Aluminum 1-Piece Driveshaft (4 BOLT TRANSMISSION)  
    1. 1350 u-joint
    2. Custom 108mm CV with high speed boot and special grease
    3. Spline made from 300m and installed into aluminum head for superior strength and light weight
    4. Balanced on our high speed machine
    5. Comes complete with all high grade hardware (not more bent Guibo bolts)
    6. Rated for 1000hp +
    7, 1-year warranty.
    8. 25lbs
    9.For 3 bolt transmission ONLY Learn More

Items 1 to 10 of 898 total

per page

Grid  List 

Set Descending Direction