The Drive Shaft Shop 1531 S.Main st. Salisbury NC 28144 9-5 Eastern time 1-704-633-2380ph 1-704-633-2385fx |
 |
 3000GT/Stealth Twin tubro Aluminum shaftThis is the all new aluminum drives shaft from you know who, the big news is this is a complete unit. The shaft will replace the first two shaft in the 3 shaft system. Made from 6061-T6 aluminum and a conversion flange made from 7075 aluminum this shaft will handle up to 550HP (for stronger shaft email for info)it. The factory shaft (first 2 shaft's) weigh 24lbs our new aluminum units is 12lb that's a full 12lb. less rotating weight, this along with its torsional properties (steel shaft twists about 5 degrees, this twists 19-20 degrees) will save the the drive train from shock factor that breaks other parts. The Shaft comes compete from trans. yoke to flange ready to install. a word about a single shaft, the design lay out under the car makes it very hard to achieve proper operating angles if you were to make a one piece single shaft. I know there are carbon fiber companies making this shaft one piece but the fact remains the operating angle's are not correct for this to work properly and would take some extensive moving of the pinion angle to do this (reason for the 3 shaft's)The carbon fiber is so good at soaking up vibration the fact that there are unequal joint angles are very rough on the fiber. Please if you understand u-joint operating angle's check it out for your self look at out angle calibration page and do the math. its a dangerous thing to play with.Retail Price: $699.99 |
View Basket Secure Checkout
Sema and Pri | FAQ