MITSUBISHI 1990-1994 Eclipse/Talon Carbon Fiber Heavy-Duty Driveshaft with (25 Spline Yoke for Shep Trans Case Upgrade)

$1,798.80

SKU: 610018 Categories: ,
Description

Product Description

These are our 950HP 3.5″ Heavy Duty Carbon Fiber drive shafts for the Eclipse and Talon. This shaft is designed to replace the first 2 shafts of the factory 3-piece system. The front angle was 2 degrees and the back was 7 degrees (not good), the problem is the rear joint would move more than 2 times as much as the front and cause a very nasty vibration. The AE-7 manual of Automotive engineers doesn’t recommend any driveshaft to have more than a 1 degree difference from one operating angle to the other (this would be a 5 degree spread). This shaft comes complete with a conversion plate for the CV end and all hardware to make this a job that can be done in the garage. This Heavy Duty shaft is rated for 950HP.

PART# MISH1-HD25-C

Additional Information

Additional Information

Weight 40 lbs
Dimensions 68 × 6 × 6 in