My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Recently Compared Products
- ACURA 1994-2001 Integra (DC2/4) Pro-Level Axle Upgrade with Intermediate Bar for Level 5.9 Axles
- ACURA 1994-2001 Integra GS-R Pro-Level 28 Spline Limited Slip Differential
- ACURA 2002-2006 Acura RSX Type S Pro-Level Axle Upgrade with Intermediate Bar for Level 5.9 Axles
- ACURA 2002-2006 Acura RSX Type S Pro-Level Limited Slip Differential (K-Series)
- AUDI 1998.5-2002 S4 B5 1000HP Front Axle Bar and Inner C.V. Upgrade
Recently Viewed Products
- BMW 1995-1999 E36 M3 1-Piece Chromoly Driveshaft (4-Bolt rear flange)
- CHEVROLET CAMARO 1970-73 500HP Aluminum Driveshaft / 12-Bolt Rear / 400 & M22 transmission
- CHEVROLET CAMARO 1970-73 500HP Aluminum Driveshaft 10-Bolt Rear 400 & M22 transmission
- CHEVROLET CAMARO 1970-73 500HP Steel Driveshaft / 12-Bolt Rear / Power glide, 350, M20 and M21 transmission
- CHEVROLET CAMARO 1970-73 500HP Steel Driveshaft 500hp / 12-Bolt Rear / 700R transmission
Import Axles
-
Warranty: 1 year Learn More -
Many of us have all been anticipating this car for some time. Its a collaboration from two leading Japanese manufacturers and it seems that they took some of the best parts from both and made one incredible car. The boxer engine from Subaru, the diff is very similar to the 86-92 Supra from what we have gathered, and its RWD. What more could you ask for? Learn More -
When the R35 first came out we rushed and made axles right away, but it seems when the cars got to about 1000HP other things started to break. Not our axles, but the inner differential stubs. The early cars never seemed to be an issue but this car is a bit heavier. This set of stubs has been designed to eliminate the conversion plate we supplied with the NI66 kits and mounts directly to the 108mm CV on the axle.The stubs are made from 300M (same stuff we have been using from Sweden) along with the billet 4340 housings will handle anything you want to put into them (these will not work with the stock axles).
(Price is for both left and right they are 299.99 each)
Please Note: Stubs will not fit the stock axles, only the Driveshaft Shop Pro-Level kit (NI66 and NI68) Learn More -
2008-2012 STi 750HP Level 5 Front Axles.
Warranty: 1 year | Special Notes: These axles only fit the 2008-2012 STi Learn More -
Warranty: 1 year | Special Notes: This kit includes both axle bars, boots, clamps and grease only (re-uses your factory inner and outer CV's) Learn More -
HONDA Civic EG/EK with J-Series V6 Conversion (EGJ2 / EKJ2 mounts ONLY) 475HP Level 2.9 Axles
$799.98
Warranty: 1-year| Special Notes: (EGJ2 / EKJ2 mounts ONLY) and must use Accord Automatic intermediate shaft with these axles Learn More -
HONDA Civic EG/EK with J-Series V6 Conversion (EGJ1 / EKJ1 mounts ONLY) 475HP Level 2.9 Axles
$799.98
Warranty: 1-year| Special Notes: (EGJ1 / EKJ1 mounts ONLY) and must use Accord Automatic intermediate shaft with these axles Learn More -
Its been a long time coming for this set of axles. When the STi came out, many had surpassed the 600HP mark and we went right from the axle bar upgrades using the factory CV's to the level 5 Axle and Hub kits. Some time has passed and the cars are starting to get older, and most builds are under 800HP so we decided to make a direct bolt in axle that will support 800WHP.
This is similar to our Level 5 axle except the outer CV is made from Billet Chromoly and the internals are also made from the same high grade material, while using the original spline size to fit the stock hubs. To make sure the center bar was up to the task of hard launches, autocross and rally Learn More -
2008 Subaru Sti (LATE 2007-MAR 2008 PRODUCTION DATES ONLY) 800HP Direct Bolt-in Axles(new price)
$999.99
Its been a long time coming for this set of axles. When the STi came out, many had surpassed the 600HP mark and we went right from the axle bar upgrades using the factory CV's to the level 5 Axle and Hub kits. Some time has passed and the cars are starting to get older, and most builds are under 800HP so we decided to make a direct bolt in axle that will support 800WHP.
This is similar to our Level 5 axle except the outer CV is made from Billet Chromoly and the internals are also made from the same high grade material, while using the original spline size to fit the stock hubs. To make sure the center bar was up to the task of hard launches, autocross and rally Learn More -
2004-2007 WRX / 2005-2007 STi (GD) Sedan 750HP Level 5 Front Axles.
Warranty: 1 year | Special Notes: These axles only fit the 2004-2007 WRX / 2005-2007 STi , these WILL NOT FIT the 2003 WRX or the 2004 STi models Learn More
