Welcome to our online store!

Pontiac

Items 11 to 20 of 33 total

per page

Items 11 to 20 of 33 total

Page:
  1. Previous Page
  2. 1
  3. 2
  4. 3
  5. 4
  6. Next Page

Grid  List 

Set Descending Direction
  1.   2007-2013 Holden Commodore VE Ute Automatic 9" Pro-formed 9" kit (new style with larger bushings and more)  
    The Drive Shaft shop is proud to announce the release of the new Generation V2 Holden Commodore VE Ute 9" Rear Conversion Kit. This system has been designed and built specifically for the Camaro platform. The new version has been updated to be a more street friendly version. First, we have changed over to using a new "Pro-Formed" Rear housing. It may have the looks of a fabricated housing, but in the true DSS way of making parts its a lot better. It is a press formed housing with less welds than a fabricated housing (eliminating the issues with fully welded housings). We have also moved the housing down and back a bit so that any Diff Case can be mounted without clearance issues.
    When we first made this kit it was for the "Baddest" cars out there (the DSS 9" kit is in all the 7 and 8 second 5th gen Camaros out to date), we were using almost solid bushings, we positioned the housing up to the gas tank as far as we could get the axle angle correct, and designed the 1st gen kit to use the Nodular case. But not anymore.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  2.   2007-2013 Holden Commodore VE Ute 6-Speed Manual 9" Pro-formed 9" kit (new style with larger bushings and more)  
    The Drive Shaft shop is proud to announce the release of the new Generation V2 Pontiac G8 / Holden Commodore VE 9" Rear Conversion Kit. This system has been designed and built specifically for the Camaro platform. The new version has been updated to be a more street friendly version. First, we have changed over to using a new "Pro-Formed" Rear housing. It may have the looks of a fabricated housing, but in the true DSS way of making parts its a lot better. It is a press formed housing with less welds than a fabricated housing (eliminating the issues with fully welded housings). We have also moved the housing down and back a bit so that any Diff Case can be mounted without clearance issues.
    When we first made this kit it was for the "Baddest" cars out there (the DSS 9" kit is in all the 7 and 8 second 5th gen Camaros out to date), we were using almost solid bushings, we positioned the housing up to the gas tank as far as we could get the axle angle correct, and designed the 1st gen kit to use the Nodular case. But not anymore.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  3.   Pontiac G8 with TH400 Transmission 3.5"  Aluminum with Direct Fit Rear Flange  
    1 year warranty

    Please Note - You must provide measurements from your car before ordering. Call us for more information. Learn More
  4.   2005-2006 GTO (ONLY) with 4L80 and Stock Differential Carbon Fiber 1-Piece Driveshaft  
    1 year warranty Learn More
  5.   2005-2006 GTO (ONLY) with 4L80 and Stock Differential 1-Piece Aluminum Driveshaft  
    1 year warranty Learn More
  6.   2004 GTO (ONLY) with 4L80 and Stock Differential 1-piece Aluminum Driveshaft  
    1 year warranty Learn More
  7.   2004 GTO (ONLY) with 4L80 and Stock Differential 1-Piece Carbon Fiber Driveshaft  
    1 year warranty Learn More
  8.   PONTIAC 2005-2006 (ONLY) GTO 3.5'' 1000HP 1-Piece Aluminum Driveshaft with Direct Fit Rear Flange  
    GTOSH-2A-0506

    Warranty: 1 year| Special Notes: 2005-2006 ONLY fits both 6 speed and auto
    Rated to 1000HP and 155MPH Max Top Speed

    The only necessary modification is the tip of the rear seatbelt bolt that protrudes into the driveshaft tunnel must be ground down to provide adequate clearance for the driveshaft. Learn More
  9.   /  
    Here is the long awaited 2-piece shaft for the GTO/Holden platform. This system is the strongest and most trouble free 2-piece shaft you can get for the car.

    Features our direct fit billet aluminum flange mount so you don't have to modify the rear differential.


    Warranty: 1 year| Special Notes: fits both 6 speed and auto Learn More
  10.   /  
    Here is the long awaited 2-piece shaft for the GTO/Holden platform. This system is the strongest and most trouble free 2-piece shaft you can get for the car.

    Features our direct fit billet aluminum flange mount so you don't have to modify the rear differential.



    Warranty: 1 year| Special Notes: fits both 6 speed and auto Learn More

Items 11 to 20 of 33 total

per page

Items 11 to 20 of 33 total

Page:
  1. Previous Page
  2. 1
  3. 2
  4. 3
  5. 4
  6. Next Page

Grid  List 

Set Descending Direction