Welcome to our online store!

 

2004-2006 GTO 3.5'' Aluminum 1-Piece Driveshaft with Strange Billet Yoke and 4340 Rear Pinion flange

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

2004-2006 GTO 3.5'' Aluminum 1-Piece Driveshaft with Strange Billet Yoke and 4340 Rear Pinion flange

Be the first to review this product

$869.99

Parts need to be assembled. Please call our office for build times.

Add Items to Cart
OR

Quick Overview

Warranty: 1 year| Special Notes: fits the 2004-2006 GTO 6-Speed Manual and Automatic
Rated to 1000HP+ and 155MPH Max Top Speed

The only necessary modification is the tip of the rear seatbelt bolt that protrudes into the driveshaft tunnel must be ground down to provide adequate clearance for the driveshaft.

Product Description

This is the new 1350 aluminum shaft from DSS, Over the past few months we have been in more direct contact with customers and there needs. We have decided to spread out the drive shafts we make; some need one thing and others more. This shaft will be among the best style shaft you can get for the car. It will have a Strange 1350 yoke (part# U1667) along with our Performance Dynamics solid u-joints. The shaft will also be supplied with a 4340 rear Billet flange mount to eliminate the 3 finger flange from the rear (this will mean opening up the Diff) We have decided to use the flange mount on the rear because in recent testing we have found it to be the most consistent way of mounting a shaft to the pinion. This along with all other shaft we make it will be balanced on our new high speed balancing machine. So if you’re looking for the best shaft available for the GTO/Holden platform look no further than DSS
Rated to 1000HP+ and 155MPH Max Top Speed
The only necessary modification is the tip of the rear seatbelt bolt that protrudes into the driveshaft tunnel must be ground down to provide adequate clearance for the driveshaft.

Part Number: GTOSH3-A

You may also be interested in the following product(s)

   

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.