My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Recently Compared Products
- TOYOTA 1993-1998 Supra Turbo Manual 1400HP Pro-Level Axle/Hub Kit
- NISSAN SKYLINE R32 ('89-'94) AWD (GT-R) Aluminum driveshaft
- SUPERFORMANCE Cobra, Coupe, GT40 05-07 Cobra 5-Speed & Dana Rear
- DODGE 1995-1999 Neon Manual (5-Lug hubs) 750HP Level 5 Axle/Hub Kit
- HONDA 2002-2006 DC5 Integra Type R (JDM/EDM) Basic Axle Level 0
Recently Viewed Products
- TOYOTA Supra 1986-1992 Turbo Manual / 1989-1992 Turbo Automatic 1-Piece Steel Driveshaft
- MITSUBISHI 1995-1999 Eclipse GSX / Talon TSi AWD Level 5 900HP Rear Axle/Hub Kit
- HONDA 1994-1997 Accord 4 Cyl 5-Speed 500HP Level 2.9 Axles
- HONDA 1994-1997 Accord 4 Cyl 5-Speed Basic Axle Level 0
- CHEVROLET CAMARO 1970-73 500HP Aluminum Driveshaft / 12-Bolt Rear Power glide, 350, M20 and M21
Product Description
Avalible ony thru Paramount Performance, please contact
Phone: 704.451.6332
Email: builderbill@paramountperformanceproducts.com
all order's recieved on this site will forwarded to Paramount
We recently took delivery of a new balancer that can spin shafts up to 9500 RPM (most balancers only spin from 400 RPM-3000 RPM). What we have found is that after 5000 RPM the slider in the middle becomes unstable and a slow speed machine will not detect this problem or be able to correct it. We have had great success with correcting this problem by balancing the shafts at actual speed. This will eliminate the vibration (you may have to correct the bad pinion angle also) the shaft will come with a new billet front plate and everything needed to install correctly.
Phone: 704.451.6332
Email: builderbill@paramountperformanceproducts.com
all order's recieved on this site will forwarded to Paramount
We recently took delivery of a new balancer that can spin shafts up to 9500 RPM (most balancers only spin from 400 RPM-3000 RPM). What we have found is that after 5000 RPM the slider in the middle becomes unstable and a slow speed machine will not detect this problem or be able to correct it. We have had great success with correcting this problem by balancing the shafts at actual speed. This will eliminate the vibration (you may have to correct the bad pinion angle also) the shaft will come with a new billet front plate and everything needed to install correctly.
