Welcome to our online store!

Domestic Axles

Items 11 to 20 of 94 total

per page

Items 11 to 20 of 94 total

Page:
  1. Previous Page
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next Page

Grid  List 

Set Descending Direction
  1.   CHEVROLET 2010-2015 CAMARO V8 1000HP Level 4 Direct Bolt-In Axles (Set)  
    1. New Anti-Wheel hop design with re-engineered thick bar

    2. 108mm CV's on both ends for longer life

    3. 300M center bars (from material out of Sweden)

    4. Rated at 1000HP

    5. Special grease use in conjunction with harder internal designed especially for the Camaro's unique axle angle.

    6. E-coated housings and powder coated bars for superior corrosion protection

    7. 1 year warranty

    8. great for Daily driven and road course/circuit cars. Learn More
  2.   2004-2006 GTO 1000Hp Axles  

    2004-2006 GTO 1000Hp Axles

    $892.49


    What we have done different is this, our skinny bar is smaller in diameter than a standard 28 spline a stock 108mm CV would use and its made from 300m, We have rolled the spline onto a ground piece of the material that during the rolling process raises the spline above the center diameter of the bar (this is done with all rolled splines DSS uses), what this also does is allow us to make the axle with out any internal snap ring (no internal groove for a square edged stress riser during torsional shock loading) We then make the Big bar Learn More
  3.   /  
    Warranty: 1year | Special Notes: Australian Domestic Market vehicles only Learn More
  4.   2004-2006 GTO DSS 9'' Independent Rear Conversion Kit  
    1. DSS 9″ housing
    2. all brackets, mounts and hardware needed for the install.
    3. (2) 1400hp rear axles with larger rolled (30% stronger than cut splines) 30 spline center and ends caps
    4. Billet 31 spline flanges for the diff.
    5. (1) 4″ Aluminum Driveshaft with solid 1350 joints, Strange Billet trans. yoke Balanced on one of the most sophisticated machines in the industry.
    6. vent port with rubber line
    7. 1-year warranty unconditional , we will do out best to extend this if we feel its truly a design problem/issue.

    Notes:
    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.

    Please Note: Standard dealer discounts do not apply to the Diff parts (front housing with internals, gears,pinion etc in drop down boxes) , dealers call for pricing Learn More
  5.   FORD Mustang Cobra 2001-2004 600HP Complete Rear Axles  
    Warranty: 1 year | Special Notes: ABS rings are not included must re-use ABS rings from factory axles Learn More
  6.   DODGE 2006-2014 Charger SRT8 / 300C SRT8 / Challenger SRT8 (with PARAMOUNT 8.8 CONVERSION) 1400HP Full Chromoly Level 5 Direct Bolt-In Axles  
    1. Full certified 300m center bars there is a reason the Viper T56 uses a 30 spline and its the reason we do too. (same center bar used in our level 5 axles for the stock rear)

    2. certified 4340AQ cages REM polished with re-designed radius on the cage windows, this is a major weak point for the axle. The fact is the other axles offered for this car uses the factory cage (and even the grease)

    3. Our Center race in the Cv is certified 300m, this should need no explanation, no one else uses this and we can prove it.....

    4. Rolled splines,most know a forging is always stronger than billet. Here at The Driveshaft shop we roll our splines, this is by far the strongest way to form a spline and is far superior to "old technology" cut splines.

    5. The outer CV is made from Billet aircraft quality and certified material and then heat treated to our demanding specs, no other CV on the market today is close to the strength of this end

    Learn More
  7.   Pontiac Fiero Manual 400HP Direct fit Axles  
    Warranty: 1 year | Special Notes: Learn More
  8.   2004-2006 GTO and Holden rear pinion flange  
    2004-2006 GTO and Holden rear pinion flange (uses 3-2-119 with it) send with (4)7-1/6-20x1.5 bolts and lock washers

    1 year warranty Learn More
  9.   ctsv-2  
    Rear Axle Bar Upgrade for the 2004-2007 CTS-V Learn More
  10.   PONTIAC 2008-2009 G8 / CHEVY SS 1000HP Direct Bolt-In Level 4 Axles  
    Warranty: 1-year| Special Notes: Learn More

Items 11 to 20 of 94 total

per page

Items 11 to 20 of 94 total

Page:
  1. Previous Page
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next Page

Grid  List 

Set Descending Direction