Welcome to our online store!

Domestic Axles

Items 1 to 10 of 20 total

per page

Items 1 to 10 of 20 total

Page:
  1. 1
  2. 2
  3. Next Page

Grid  List 

Set Descending Direction
  1.   PONTIAC 2004-2006 GTO 1000HP 300m Anti-Wheelhop Axle Kit with 300m 108mm Bolt-on Inner Stubs  
    Reasons to use DSS axles:

    1. Full certified 300m center bars (not just 28 spline like the others). There is a reason the Viper T56 uses a 30 spline and its the reason we do too.

    2. Certified 4340AQ cages with re-designed radius on the CV cage windows.
    Others will try to impress you with saying chromoly is a weaker part for the center bar (we have always used 300m and 4340) but uses it on their cages, we're not sure how most dont see thru this, but our cages are full 4340AQ. You decide.

    3. Our center race in the CV is certified 300m, this should need no explanation, no one else uses this and we can prove it...

    4. Rolled splines on our axle bars. Most know that a forging is always stronger than billet. Here at The Driveshaft Shop we roll our splines, this is by far the strongest way to form a spline and is far superior to cut splines (old technology).

    Warranty: 1 year| Special Notes: Learn More
  2.   2007-2013 Holden Commodore VE Ute 6-Speed Manual 9" Pro-formed 9" kit (new style with larger bushings and more)  
    The Drive Shaft shop is proud to announce the release of the new Generation V2 Pontiac G8 / Holden Commodore VE 9" Rear Conversion Kit. This system has been designed and built specifically for the Camaro platform. The new version has been updated to be a more street friendly version. First, we have changed over to using a new "Pro-Formed" Rear housing. It may have the looks of a fabricated housing, but in the true DSS way of making parts its a lot better. It is a press formed housing with less welds than a fabricated housing (eliminating the issues with fully welded housings). We have also moved the housing down and back a bit so that any Diff Case can be mounted without clearance issues.
    When we first made this kit it was for the "Baddest" cars out there (the DSS 9" kit is in all the 7 and 8 second 5th gen Camaros out to date), we were using almost solid bushings, we positioned the housing up to the gas tank as far as we could get the axle angle correct, and designed the 1st gen kit to use the Nodular case. But not anymore.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  3.   2007-2013 Holden Commodore VE Ute Automatic 9" Pro-formed 9" kit (new style with larger bushings and more)  
    The Drive Shaft shop is proud to announce the release of the new Generation V2 Holden Commodore VE Ute 9" Rear Conversion Kit. This system has been designed and built specifically for the Camaro platform. The new version has been updated to be a more street friendly version. First, we have changed over to using a new "Pro-Formed" Rear housing. It may have the looks of a fabricated housing, but in the true DSS way of making parts its a lot better. It is a press formed housing with less welds than a fabricated housing (eliminating the issues with fully welded housings). We have also moved the housing down and back a bit so that any Diff Case can be mounted without clearance issues.
    When we first made this kit it was for the "Baddest" cars out there (the DSS 9" kit is in all the 7 and 8 second 5th gen Camaros out to date), we were using almost solid bushings, we positioned the housing up to the gas tank as far as we could get the axle angle correct, and designed the 1st gen kit to use the Nodular case. But not anymore.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  4.   2008-2010 Pontiac G8 / CHEVY SS / Holden Commodore VE 6-Speed Manual 9" Pro-formed 9" kit (new style with larger bushings and more)  
    The Drive Shaft shop is proud to announce the release of the new Generation V2 Pontiac G8 / Holden Commodore VE 9" Rear Conversion Kit. This system has been designed and built specifically for the Camaro platform. The new version has been updated to be a more street friendly version. First, we have changed over to using a new "Pro-Formed" Rear housing. It may have the looks of a fabricated housing, but in the true DSS way of making parts its a lot better. It is a press formed housing with less welds than a fabricated housing (eliminating the issues with fully welded housings). We have also moved the housing down and back a bit so that any Diff Case can be mounted without clearance issues.
    When we first made this kit it was for the "Baddest" cars out there (the DSS 9" kit is in all the 7 and 8 second 5th gen Camaros out to date), we were using almost solid bushings, we positioned the housing up to the gas tank as far as we could get the axle angle correct, and designed the 1st gen kit to use the Nodular case. But not anymore.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  5.   2008-2010 Pontiac G8 / CHEVY SS / Holden Commodore VE Automatic 9" Pro-formed 9" kit (new style with larger bushings and more)  
    The Drive Shaft shop is proud to announce the release of the new Generation V2 Pontiac G8 / Holden Commodore VE 9" Rear Conversion Kit. This system has been designed and built specifically for the Camaro platform. The new version has been updated to be a more street friendly version. First, we have changed over to using a new "Pro-Formed" Rear housing. It may have the looks of a fabricated housing, but in the true DSS way of making parts its a lot better. It is a press formed housing with less welds than a fabricated housing (eliminating the issues with fully welded housings). We have also moved the housing down and back a bit so that any Diff Case can be mounted without clearance issues.
    When we first made this kit it was for the "Baddest" cars out there (the DSS 9" kit is in all the 7 and 8 second 5th gen Camaros out to date), we were using almost solid bushings, we positioned the housing up to the gas tank as far as we could get the axle angle correct, and designed the 1st gen kit to use the Nodular case. But not anymore.

    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More
  6.   PONTIAC 2004-2006 GTO 600HP Axles with 1-1/8" Torsional Center Bar  
    PONTIAC 2004-2006 GTO 600HP Axles with 1-1/8" Torsional Center Bar
    Priced per pair Learn More
  7.   PONTIAC 2008-2009 G8 / CHEVY SS 1400HP Level 5 Axle/Hub Kit  
    Warranty: 1-year| Special Notes: Learn More
  8.   2004-2006 Pontiac GTO / Holden Monaro Wavetrac Differential  
    2004-2006 Pontiac GTO / Holden Monaro Wavetrac Differential Learn More
  9.   2004-2006 GTO Anti-Wheel Hop 1000Hp Axles  
    What we have done different is this, our skinny bar is smaller in diameter than a standard 28 spline a stock 108mm CV would use and its made from 300m, We have rolled the spline onto a ground piece of the material that during the rolling process raises the spline above the center diameter of the bar (this is done with all rolled splines DSS uses), what this also does is allow us to make the axle with out any internal snap ring (no internal groove for a square edged stress riser during torsional shock loading) We then make the Big bar Learn More
  10.   2004-2006 GTO DSS 9'' Independent Rear Conversion Kit  
    1. DSS 9″ housing
    2. all brackets, mounts and hardware needed for the install.
    3. (2) 1400hp rear axles with larger rolled (30% stronger than cut splines) 30 spline center and ends caps
    4. Billet 31 spline flanges for the diff.
    5. (1) 4″ Aluminum Driveshaft with solid 1350 joints, Strange Billet trans. yoke Balanced on one of the most sophisticated machines in the industry.
    6. vent port with rubber line
    7. 1-year warranty unconditional , we will do out best to extend this if we feel its truly a design problem/issue.

    Notes:
    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.

    Please Note: Standard dealer discounts do not apply to the Diff parts (front housing with internals, gears,pinion etc in drop down boxes) , dealers call for pricing Learn More

Items 1 to 10 of 20 total

per page

Items 1 to 10 of 20 total

Page:
  1. 1
  2. 2
  3. Next Page

Grid  List 

Set Descending Direction