Welcome to our online store!

GTO

10 Item(s)

per page

10 Item(s)

Grid  List 

Set Descending Direction
  1.   PONTIAC 2004-2006 GTO 1400HP 300m Axle Kit with 300m 108mm Bolt-on Inner Stubs  
    Reasons to use DSS axles:

    1. Full certified 300m center bars (not just 28 spline like the others). There is a reason the Viper T56 uses a 30 spline and its the reason we do too.

    2. Certified 4340AQ cages with re-designed radius on the CV cage windows.
    Others will try to impress you with saying chromoly is a weaker part for the center bar (we have always used 300m and 4340) but uses it on their cages, we're not sure how most dont see thru this, but our cages are full 4340AQ. You decide.

    3. Our center race in the CV is certified 300m, this should need no explanation, no one else uses this and we can prove it...

    4. Rolled splines on our axle bars. Most know that a forging is always stronger than billet. Here at The Driveshaft Shop we roll our splines, this is by far the strongest way to form a spline and is far superior to cut splines (old technology).

    Warranty: 1 year| Special Notes: Learn More
  2.   PONTIAC 2004-2006 GTO 1400HP Axles -with larger 30- spline bars  
    Reasons to use DSS axles:

    1. Full certified 300m 30 spline center bars (not just 28 spline like the others). There is a reason the Viper T56 uses a 30 spline and its the reason we do too.

    2. Certified 4340AQ cages with re-designed radius on the CV cage windows.

    3. Our center race in the CV is certified 300m, this should need no explanation, no one else uses this and we can prove it...

    4. Rolled splines on our axle bars. Most know that a forging is always stronger than billet. Here at The Driveshaft Shop we roll our splines, this is by far the strongest way to form a spline and is far superior to cut splines (old technology).

    5. not recomended for use with 28 spline stubs (use the 1000Hp Anti-sheel Hop or Even axles)

    Warranty: 1 year| Special Notes: Learn More
  3.   PONTIAC 2004-2006 GTO 1000HP Axles -with 300m 1-1/8'' torsional center bars  
    1. Full certified 300m center bars, made with our special heat treat and temper.

    2. Chromoly CV cages


    3. Rolled spline center bars. Most know that a forging is always stronger than billet. Here at The Driveshaft Shop we roll our splines, this is by far the strongest way to form a spline and is far superior to cut splines (old technology).


    Warranty: 1 year| Special Notes: Learn More
  4.   PONTIAC 2004-2006 GTO 108mm Bolt-on Differential Stubs (for stock GTO differential with replaceable spline section)  
    We recently decided to move all the parts for the GTO to be made from 300M, the real reason is the heavier cars seem to be able to damaged most parts not only due to HP but that fact that a 500Hp all motor car with s drag radial is just as rough on a axle as a 950Hp turbo car.

    This is our new 300m differential stub set for the GTO platform, these are the finest quality stubs that you can Warranty: 1 year| Special Notes: Learn More
  5.   PONTIAC 2004-2006 GTO Direct fit chromoly wheel flanges (made to replace the factory wheel flanges)  
    Warranty: 1-year| Special Notes: Learn More
  6.   2004-2006 GTO DSS 9'' Independent Rear Conversion Kit  
    1. DSS 9″ housing
    2. all brackets, mounts and hardware needed for the install.
    3. (2) 1400hp rear axles with larger rolled (30% stronger than cut splines) 30 spline center and ends caps
    4. Billet 31 spline flanges for the diff.
    5. (1) 4″ Aluminum Driveshaft with solid 1350 joints, Strange Billet trans. yoke Balanced on one of the most sophisticated machines in the industry.
    6. vent port with rubber line
    7. 1-year warranty unconditional , we will do out best to extend this if we feel its truly a design problem/issue.

    Notes:
    The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.

    Please Note: Standard dealer discounts do not apply to the Diff parts (front housing with internals, gears,pinion etc in drop down boxes) , dealers call for pricing Learn More
  7.   2004-2006 GTO Anti-Wheel Hop 1000Hp Axles  
    What we have done different is this, our skinny bar is smaller in diameter than a standard 28 spline a stock 108mm CV would use and its made from 300m, We have rolled the spline onto a ground piece of the material that during the rolling process raises the spline above the center diameter of the bar (this is done with all rolled splines DSS uses), what this also does is allow us to make the axle with out any internal snap ring (no internal groove for a square edged stress riser during torsional shock loading) We then make the Big bar Learn More
  8.   2004-2006 Pontiac GTO / Holden Monaro Wavetrac Differential  
    2004-2006 Pontiac GTO / Holden Monaro Wavetrac Differential Learn More
  9.   PONTIAC 2004-2006 GTO 600HP Axles with 1-1/8" Torsional Center Bar  
    PONTIAC 2004-2006 GTO 600HP Axles with 1-1/8" Torsional Center Bar
    Priced per pair Learn More
  10.   PONTIAC 2004-2006 GTO 1000HP 300m Anti-Wheelhop Axle Kit with 300m 108mm Bolt-on Inner Stubs  
    Reasons to use DSS axles:

    1. Full certified 300m center bars (not just 28 spline like the others). There is a reason the Viper T56 uses a 30 spline and its the reason we do too.

    2. Certified 4340AQ cages with re-designed radius on the CV cage windows.
    Others will try to impress you with saying chromoly is a weaker part for the center bar (we have always used 300m and 4340) but uses it on their cages, we're not sure how most dont see thru this, but our cages are full 4340AQ. You decide.

    3. Our center race in the CV is certified 300m, this should need no explanation, no one else uses this and we can prove it...

    4. Rolled splines on our axle bars. Most know that a forging is always stronger than billet. Here at The Driveshaft Shop we roll our splines, this is by far the strongest way to form a spline and is far superior to cut splines (old technology).

    Warranty: 1 year| Special Notes: Learn More

10 Item(s)

per page

10 Item(s)

Grid  List 

Set Descending Direction