Welcome to our online store!

Dodge

Items 21 to 27 of 27 total

per page

Items 21 to 27 of 27 total

Page:
  1. Previous Page
  2. 1
  3. 2
  4. 3

Grid  List 

Set Descending Direction
  1.   DODGE 2001-2002 Dodge Viper (Stock Differential) 1200HP Level 5 Direct Bolt-In Axles with Diff Stubs  
    Warranty: 1-year| Special Notes: 2001-2002 with Stock Differential ONLY Learn More
  2.   DODGE 2000-2005 Neon Automatic 500HP Level 3 Axles  
    Warranty: 1 year | Special Notes: Learn More
  3.   DODGE 2000-2005 Neon Manual 500HP Level 3 Axles  
    Warranty: 1 year | Special Notes: non-abs Learn More
  4.   DODGE 2003-2005 Neon SRT4 550HP Level 3 Axles  
    Warranty: 1 year | Special Notes: ABS rings are included Learn More
  5.   DODGE 2003-2005 Neon SRT4 with DCR Automatic Trans 750HP Level 5 Axles  
    Warranty: 1 year| Special Notes: These axles are for the Darrell Cox Racing Automatic transmission ONLY. ABS rings are included. Learn More
  6.   DODGE 2003-2005 Neon SRT4 750HP Level 5 Axles  
    Warranty: 1 year| Special Notes: ABS rings are included. Learn More
  7.   2015+ Charger Hellcat / 392 SRT8 Automatic 9-Inch Direct Bolt-in Rear Conversion Kit -includes Axles / Hubs and 4'' Aluminum CV shaft ////// DIRECT BOLT-IN KIT\\\\\\  
    The Driveshaft Shop 2015+ Charger Hellcat / 392 SRT8 Automatic 9" DIRECT BOLT IN Rear Conversion is now a reality.


    The kit will come complete with 9" rear housing (bare housing), front mount,1400HP rated 31,33 OR 35 spline diff stubs and true 1400HP axles . The outer CV is a Extreme built Billet CV with fully REM polished internals along with a Porsche style 930 inner CV. We have custom made the internals of these CV's to use the larger center bar that is the strongest tested part on the market today and is used (not claimed) in each and every 9,8,7 and even 6 second IRS record breaking car out today. You are able to pick the level of the Diff you want, when we made this kit we used a .375 spacer on the front mount, this spacer will allow the use of a simple Nodular or Forged Aluminum case right up to the Pro-Bolt thru case with out having to change anything (the pro-cases are longer, just remove the spacer and its ready)

    This, along with our full 4" aluminum (or a 600.00 Carbon upgrade) This is not the smaller 1330 that is offered by a another manufacturer's rear conversion), balanced on our new 9500RPM balancer. A quick word about balancing; we have......

    Note:The DSS 9" kits are designed for use with the Strange center section and 5-bolt pinion support. If you are using a center section from a different manufacturer, modifications may be necessary and you are on your own. We cannot guarantee fitment for any center section other than the Strange 5-bolt unit.
    Learn More

Items 21 to 27 of 27 total

per page

Items 21 to 27 of 27 total

Page:
  1. Previous Page
  2. 1
  3. 2
  4. 3

Grid  List 

Set Descending Direction