1996-2000 Honda Civic (EK/EJ Chassis) |
D-Series SOHC 1.5 / 1.6 Motor and Factory Trans (all |
B-Series DOHC w/Cable Clutch swap from a 1990-1993 Integra |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know.  |
96-00 Civic with B Series DOHC Swap with cable clutch Trans from a Japan spec civic SIR with Y1 trans. (has SH3 number on the cast bracket of the intermediate bar) both axles are male and shorter than 90-93 style Integra Axles(intermediate bar is female) |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know |
96-00 Civic B-Series DOHC/Hydraulic Clutch From 94+ Integra or 99-00 SI |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know |
Spool- Hydraulic B-Series (STANDARD 27 SPLINE CHROMOLY SPOOL)----------------HO27C |
96-00 Civic with H-Series Prelude Hydraulic Clutch Swap Most mount kits A quick word about engine mounts, almost all engine mounts were a copy of of the original Hasport ones. They are all them same Except for the new Hasport "EKH2" mounts that set the motor/trans in a better position for the axles. Please make sure you know what mounts you have before ordering or calling (check with hasport if your not sure. |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know |
Level 5.9 1000hp Axle/Hub kit MOST companys mount kts except Hasport "EKH2" ABS or 94+ Integra spindle also needs to use a Prelude intermediate bar (hubs need to be changed and are supplied in the kit)---Kit--HY56 Level 5.9 1000hp Axle/Hub kit must have the ABS or 94+ Integra spindle also needs to use a Prelude intermediate bar (hubs need to be changed and are supplied in the kit)"Hasport EKH2 mounts only"---HZ56 |
92-01 Prelude Spool (standard 27 spline)-------------------------------------PR27C Coming Soon |
97-00 Civic with K-Series swap(using K20 RSX/Si Intermediate Bar) (Left axle is male/right female)For Hasport EKK2 mounts please order as a 92-95 EG civic |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know |
3.9 600HP Axle/Hub kit w/non-ABS size hub (bearing ID is 1.495)---------------------KK35 3.9 600HP Axle/Hub kit w/ABS size hub (bearing ID is 1.693)---------------------------KK36 |
Intermediate bar for K Series RSX/Civic SI (bar only no bearing) 1000hp--------------------------------KA2727 |
K Series RSX/Civic SI Spool (standard 27 spline)--------------------------------KA27C Coming soon |
sample | Featured Vech. | Shopping Cart | FAQ