1992-1995 Civic (EG) and 1994-2001 Acura Integra (DC2/4) | |
1992-1995 Civic with stock SOHC D series 1.5/1.6 motor/Trans. | |
Basic Axle (not for racing) | |
Level 2.9 475hp axles | |
92-95 Civic or 1994-2001 Integra with B Series DOHC Swap with cable clutch from a 90-93 integra(except jap spec Y1) both axle are male (intermidiate bar is female) | |
Basic Axle (not for racing) | |
Level 2.9 475hp axles | |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know. |  |
Level 3.9 Axle/hub 600HP kit made to use the SMALLER NON-ABS spindles (hubs need to be changed and are supplied in the kit)NON-ABS bearing I.D. is 1.495 | |
Level 3.9 600hp Axle/Hub kit made to use the larger ABS or Integra spindles (hubs need to be changed and are supplied in the kit)ABS or Interga bearing I.D. is 1.695 | |
Level 5.9 1000hp Axle/Hub kit must have the ABS or 94+ Integra spindle also needs to use a B/Hydraulic intermediate bar (hubs need to be changed and are supplied in the kit) | |
92-95 Civic or 1994-2001 Integra with B Series DOHC Swap with cable clutch Trans from a Japan spec civic SIR with Y1 trans. (has SH3 number on the cast bracket of the intermediate bar) both axles are male and shorter than 90-93 style Integra Axles(intermediate bar is female) | |
Basic Axle (not for racing) | |
Level 2.9 475hp axles | |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know | |
Level 3.9 600hp Axle/Hub kit made to use the SMALLER NON-ABS spindles (hubs need to be changed and are supplied in the kit)NON-ABS bearing I.D. is 1.495 | |
Level 3.9 600hp Axle/Hub kit made to use the larger ABS or Integra spindles (hubs need to be changed and are supplied in the kit)ABS or Interga bearing I.D. is 1.695 | |
Level 5.9 1000hp Axle/Hub kit must have the ABS or 94+ Integra spindle also needs to use a B/Hydraulic intermediate bar (hubs need to be changed and are supplied in the kit) | |
92-95 Civic or 1994-2001 Integra with B Series DOHC Swap with Hydraulic Clutch/Trans from a 94+ Integra/99+ civic SI (Left axle is female/Right is Male) | |
Basic Axle (not for racing) | |
Level 2.9 475hp axles | |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know | |
Level 3.9 600hp Axle/Hub kit made to use the SMALLER NON-ABS spindles (hubs need to be changed and are supplied in the kit)NON-ABS bearing I.D. is 1.495 | |
Level 3.9 600hp Axle/Hub kit made to use the larger ABS or Integra spindles (hubs need to be changed and are supplied in the kit)ABS or Interga bearing I.D. is 1.695 | |
Level 5.9 1000hp Axle/Hub kit must have the ABS or 94+ Integra spindle also needs to use a B/Hydraulic intermediate bar (hubs need to be changed and are supplied in the kit) | |
Intermediate bar for B/Hydro (bar only no bearing) 1000hp  | |
B Series/Hydro Spool (standard 27 spline)  | HO27C Coming Soon |
92-95 Civic or 1994-2001 Integra with H series 1992-2001 Prelude Swap using the prelude intermediate bar. Will not work with Accord intermediate barA quick word about engine mounts, almost all engine mounts were a copy of of the original Hasport ones. They are all them same Except for the new Hasport "EGH2" mounts that set the motor/trans in a better position for the axles. Please make sure you know what mounts you have before ordering or calling (check with hasport if your not sure. | |
Basic Axle (not for racing)all mounts except Hasport EGH2 | |
Basic Axle (not for racing)Hasport EGH2 mounts only | |
2.9 475HP Axles all mounts except Hasport EGH2 | |
2.9 475HP Axles for Hasport EGH2 mounts only | |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know | |
Level 3.9 600hp Axle/Hub kit made to use the SMALLER NON-ABS spindles (hubs need to be changed and are supplied in the kit)NON-ABS bearing I.D. is 1.495 All mounts except Hasport EGH2 | |
Level 3.9 600hp Axle/Hub kit made to use the SMALLER NON-ABS spindles (hubs need to be changed and are supplied in the kit)NON-ABS bearing I.D. is 1.495 Hasport EGH2 mounts only | |
Level 3.9 600hp Axle/Hub kit made to use the larger ABS or Integra spindles (hubs need to be changed and are supplied in the kit)ABS or Interga bearing I.D. is 1.695 All mounts except Haspot EGH2 | |
Level 3.9 600hp Axle/Hub kit made to use the larger ABS or Integra spindles (hubs need to be changed and are supplied in the kit)ABS or Interga bearing I.D. is 1.695 Haspot EGH2 mounts only. | |
Level 5.9 1000hp Axle/Hub kit must have the ABS or 94+ Integra spindle also needs to use a Prelude intermediate bar (hubs need to be changed and are supplied in the kit) All mounts except Hasport EGH2 | |
Level 5.9 1000hp Axle/Hub kit must have the ABS or 94+ Integra spindle also needs to use a Prelude intermediate bar (hubs need to be changed and are supplied in the kit) Hasport EGH2 mounts only | |
Intermediate bar for 92-01 Prelude(bar only no bearing) 1000hp | |
92-01 Prelude Spool (standard 27 spline) | PR27C Coming Soon |
92-95 Civic or 1994-2001 Integra with K Series Motor/Tans (RSX/SI intermediate bar)Most companys mount kits | |
Basic Axle (not for racing) | |
Level 2.9 475hp axles | |
For the higher 3.9 and 5.9 kits you will need to change the hubs, click on the hub to the right to learn what you need to know. | |
Level 3.9 600hp Axle/Hub kit made to use the SMALLER NON-ABS spindles (hubs need to be changed and are supplied in the kit)NON-ABS bearing I.D. is 1.495 | |
Level 3.9 600hp Axle/Hub kit made to use the larger ABS or Integra spindles (hubs need to be changed and are supplied in the kit)ABS or Interga bearing I.D. is 1.695 | |
5.9 1000HP (must use 94+Integra/Civic ABS spindles -Bearing OD is 1.693 | |
K Series RSX/Civic SI Spool (standard 27 spline) | KA27C Coming soon |
Intermediate bar for K series swap(bar only no bearing) 1000hp | |
job offering | sample | Shopping Cart | FAQ